Cisco Wireless-N Access Point Power Over Ethernet WAP121

KSh15,000.00

Cisco Wireless-N Access Point Power Over Ethernet WAP121

Operating on the 2.4 GHz frequency and supporting wireless data throughput of up to 300 Mbps, the Cisco Wireless-N Access Point Power Over Ethernet WAP121 with Single Point Setup from Cisco makes it easy to extend the reach of an existing network.

Description

Cisco Wireless-N Access Point Power Over Ethernet WAP121

Operating on the 2.4 GHz frequency and supporting wireless data throughput of up to 300 Mbps, the Cisco Wireless-N Access Point Power Over Ethernet WAP121 with Single Point Setup from Cisco makes it easy to extend the reach of an existing network. With a simplified setup process a network administrator can easily deploy multiple access points and with the dedicated configuration wizard the network settings can be easily monitored and managed.

Operating on the 2.4 GHz frequency and supporting 802.11b/g/n wireless networking standards this Cisco access point supports data transfer rates of up to 300 Mbps. Simply attach the WAP121 AP to an existing network via the single Fast Ethernet port and begin distributing up to four separate wireless connections with support for up to 4 SSIDs. Once configured, the wireless connection can be secured using WPA/WPA2/WEP encryption standards along with access control management and rogue access point detection.

Highly secure, high-speed 802.11n wireless networking delivers enhanced throughput and extended range for bandwidth-intensive applications.
Wizard-based setup and configuration enables fast, simple deployment.
Single Point Setup controllerless multi-access point deployment and management technology makes configuration simple.
Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, helps protect sensitive business information.
Support for PoE enables easy installation without expensive additional wiring.
Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network.
Elegant, compact design with internal antennas and versatile mounting kit enables installation on a ceiling, wall, or desktop.
Intelligent QoS prioritizes network traffic to help keep critical network applications running at top performance.
Power-saving sleep mode and port control features help maximize energy efficiency.
Secure guest access enables safe wireless connectivity for visitors.
Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades.
Can be managed remotely using a web browser via the SNMP v3 protocol

Cisco WAP121 Specs

General
Minimum Requirements802.11b, 802.11g, 802.11n wireless adapter with TCP/IP protocol installed per PC
Switch/router with PoE support or PoE injector when used with PoE
Web-based configuration: Java-enabled web browser
StandardsIEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
PortsLAN Fast Ethernet auto sensing, DC jack
SwitchPower button (on/off)
ButtonPower (on/off) push button, Reset button
Cabling TypeCategory 5e or better
AntennaInternal antennas optimized for wall, ceiling, or desktop placement
LEDsPower, WLAN, LAN
Operating SystemLinux
Physical Interface
Ports10BASE-T/100BASE-TX Ethernet, 12 VDC power with support for 802.3af PoE
Power SupplyExternal 12 V 0.5 A DC power jack (Energy Star 2.0 compliant with Efficiency Level 5) and 802.3af PoE
ButtonPower (on/off) push button; Reset button
LockSlot for Kensington lock
LEDPower, Wireless, Ethernet
PoE
PoE802.3af
Peak Power6 W
Network
SupportsVLAN, 802.1X supplicant, SSID to VLAN mapping, Auto channel selection, Spanning tree, Load balancing
Number of VLANs1 management VLAN plus 4 VLANs for Service Set ID (SSID)
Multiple SSIDs4
IPv6IPv6 host support
IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc
Layer 2 Features802.1Q-based VLANS, 4 active VLANS plus 1 management VLAN
Security
EncryptionWPA/WPA2/WEP & Enterprise authentication
Access ControlManagement access control list (ACL) plus MAC ACL
Secure ManagementHTTPS
Wi-Fi Protected SetupSoft WPS, no hardware push button
Broadcast SystemSSID
Detection FunctionsRogue access point
Mounting Options
OptionsDesktop installation; mounting bracket included for easy ceiling or wall mounting
Security
LockKensington lock slot
Quality of Service (QoS)
QoSWi-Fi Multimedia & Traffic Specification (WMM TSPEC)
Performance
Data RateUp to 300 Mbps data rate (real-world throughput will vary)
User supportRecommended up to 16 connected users, or 10 active users.
Configuration
Web User InterfaceBuilt-in web user interface for easy browser-based configuration (HTTP/HTTPS)
Management
SetupSingle Point
Access Point ManagementMaximum per cluster: 4
Active clients per cluster: 40
Management & Protocols
Management ProtocolsWeb browser, Simple Network Management Protocol (SNMP) v3, Bonjour
Event LoggingEvent logging
Network DiagnosticsLogging and packet capture
Web firmware upgradeFirmware upgradable through web browser, imported/exported configuration file
Dynamic Host Configuration Protocol (DHCP)DHCP client
HostIPv6
Wireless
FrequencySingle-band 2.4 GHz
Radio TypeSingle radio
Modulation TypeOFDM (Orthogonal Frequency Division Multiplexing)
Channels1 to 13 (depending on country)
Channels 1 through 11 (FCC)
Channels 1 through 13 (ETSI)
IsolationWireless isolation between clients
Internal AntennasInternal fixed PIFA antennas
Antenna Gain In dBi2 dBi each antenna
Transmitted Power802.11b @ 11 Mbps: 17 dBm
802.11g @ 54 Mbps: 13 dBm
802.11n @ HT20HT40, MCS15: 13 dBm
Receiver Sensitivity802.11b: 11 Mbps @ -86 dBm
802.11g: 54 Mbps @ -71 dBm
802.11n: 300 Mbps @ -64 dBm
Multiple SSIDs4
SupportsWireless Distribution System (WDS), Roaming, Wireless VLAN map, WLAN security
WMMWith unscheduled automatic power save and voice profile
Access Point ModesAccess Point mode, WDS bridging, Workgroup Bridge mode
Environmental
Power12 VDC, 0.5 A input, and IEEE802.3af compliant PoE
CertificationsFCC class B, CE, IC, Wi-Fi
Operating Temperature32 to 104°F (0 to 40°C)
Storage Temperature-4 to 158°F (-20 to 70°C)
Operating Humidity10 to 85% non-condensing
Storage Humidity5 to 90% non-condensing
Mean Time Between Failures531189 hours
Physical
Dimensions (W x D x H)4.89 x 4.89 x 1.38″ (124.17 x 124.17 x 35.00 mm)
Weight0.37 lb (0.16 kg)
Packaging Info
Package Weight1.3 lb
Box Dimensions (LxWxH)9.7 x 5.8 x 3.2″